Connect Car Stereo Receiver Wiring Harness for 2003-11 Honda

• Gender: Male
• Pin: 16pin
• Application: Automotive
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Metra 70-7863
• Certification: RoHS
• Terminal Material: Copper
• Interface Type: Car Stereo to The Factory Wiring
• Transport Package: Neutral or Customized
• Specification: RoHS Materials
• Trademark: AIOKINGSUN
• Origin: China
• HS Code: 8544421100
• Production Capacity: 10000pieces/Week

Product Description

Metra 70-7863 Receiver Wiring Harness

Installation Note: This harness uses your factory amplifier; your new stereo must have three pairs of preamp outputs to connect this harness.

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.

First, attach the color-coded wires on your AIOKINGSUN-supplied harness to the wires from your new stereo. If you're not using a soldering iron, we recommend that you purchase some wire connectors to secure the connections. Check out our handy article on three ways to connect the wiring harness here.

Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness makes installing your new stereo easier, and allows you to put the factory radio back when you sell your vehicle or return it at the end of the lease. A detailed instruction sheet comes with the harness. Warranty: 60 days.

Please read this important note: This harness may not contain provisions for every wire needed to complete your installation, and it will not accommodate special navigation, video, or factory steering wheel control connections. You will need a special adapter if you want your factory steering wheel audio controls to work with your new stereo.

 

Wiring Notes: If the wiring harness is not equipped with a ground wire, you will need to ground the aftermarket head unit's ground wire to the metal chassis of your vehicle. Some vehicle's may require you to bypass the vehicle's factory amplifier (in another location from factory radio) or hardwire certain connections. If your vehicle is equipped with factory steering wheel controls, an additional SWIC adapter is required & sold separately.

Wire Code Chart:

(Power/Amp Harness)

Wire Color	Function
Red	+12 Volt Accessory
Yellow	+12 Volt Constant
Black	Ground
Blue/White	Power Antenna/Amp Turn-On
Orange	Illumination
White RCA	Left Front Channel
Gray RCA	Right Front Channel
Green RCA	Left Rear Channel
Violet RCA	Right Rear Channel

(Subwoofer Input Harness)

Wire Color	Function
White RCA	Subwoofer Channel

(Aux Input Harness)

Wire Color	Function
White RCA	Left Channel
Red RCA	Right Channel

Factory Amp Note: This harness includes RCA connections (instead of speaker wire leads) to connect the aftermarket head unit to your vehicle's factory amp. Your aftermarket head unit must be equipped with front, rear, and sub preamp outputs.